Hangzhou Yongrun Commodity Co.,Ltd
Call us on:+86-571-88521791   E-mail: HZYONGRUN@HOTMAIL.COM
News
Home > News > Content
Clothes Rack To Ensure That The Load Bearing Effect
Hangzhou Yongrun Commodity Co.,Ltd | Updated: Jul 10, 2017

Clothes Rack manufacturers are generally used stainless steel Clothes Rackline, stainless steel models are many but generally consistent that is not easy to rust, if it is easy to rust that is the use of poor quality steel pipe, whether it is bright or bright will be a bad grade, the general Clothes Rack Rod manufacturers will be on the Clothes Rack inside the table for the corresponding treatment, used to prevent corrosion, anti-rust, the interface is fully soldering through the groove welding, so that the interface will not appear rust phenomenon. The Clothes Rack should also be based on their own needs to buy the appropriate product in order to meet their own needs.

When the Clothes Rack rack used for some time, the appropriate replacement of some parts, including hand, dry rod, etc., is also a good maintenance approach, so you can greatly extend the life of the Clothes Rack rack.

If we want to buy a very high cost of the Clothes Rack rack, then we must come to our company, we professional wholesale aluminum hanger. We produced by the Clothes Rack inexpensive, quality assurance, we can meet the needs of the use.

Clothes Rack manufacturers in the use of more and more products in life, the use of Clothes Rack in the life of the rods are more, so the type of Clothes Rack on the more expensive, hand, electric, fixed, including electric Drying racks of high strength, high transmission efficiency, load-bearing capacity can be greatly improved, smooth and smooth hangers. Overload, resistance to automatic shutdown maintenance system, a comprehensive maintenance of motor and wire rope safe operation, greatly improve the service life of the product, the exposed parts of the place where the rust is easy to do a moisture treatment to increase the life of the Clothes Rackline. Fixed dry rod, to ensure that bearing the effect of force, dry rod length can be cut according to space freely.

 Dry Clothes Rack are generally stainless steel or aluminum alloy material, if it is easy to rust rust corrosion, while rust powder easy to wash Clothes Rack dirty, and bad cleaning. Some of the Clothes Rack is fixed, and some can be lifted, fixed generally have to punch, and to be stable to use the expansion of the wire, if the location of the hole is not easy to fall off, have to re-punch, the wall Will cause damage to the new house who will feel bad, dry Clothes Rack manufacturer Another product is electric or manual lift racks installed more complicated but easy to use, Clothes Rack manufacturers use the material or those who are mainly added Wire rope and motor part as power and traction. Choose Clothes Rack or drying racks mainly according to their preferences to choose, because different products have the same characteristics. Hope customers in the choice of a lot of consideration, so as not to buy home to cause inconvenience to life.


Product Categories

Fast Track

  • Feedback
    Hangzhou Yongrun Commodity Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: Fengdu Industry Area Ii, Pingyao Town, Yuhang District, Hangzhou 311115
    Tel: +86-571-88521791    
    Fax: +86-571-88521793    
    E-mail: HZYONGRUN@HOTMAIL.COM
Copyright © Hangzhou Yongrun Commodity Co.,Ltd